Most vehicles can be remapped through the OBD (Onboard Diagnostic) port normally located one foot away from the steering wheel. OBD tuning can be completed on vehicles from the year 2000 onwards. This can take up to around 1hr 30 mins to complete.
Is sometimes required on newer or locked ECU’s. This mode of tuning requires the ECU to be removed from the vehicle. This can take up to around 2-3 hours to complete.
ECU Remapping Benefits
Increase In Torque Between 35-45%
The increase in Torque of 20-40% is only available for
Increase BHP Between 20-40%
The increase in BHP of 20-40% is only available for T
Increase Fuel Economy 8-15%
Most of our customers report back between an 8-15% increase in fuel economy. This only applies to Turbo-Diesel Powered Engines. Fewer gear changes are also achieved along with less throttle used to get to desired speeds.
Driveability is improved due to the extra torque that we remap into the vehicles ECU. We Deliver a smoother torque curve and power delivery. Turbo Lag disappears the power comes in earlier and the throttle response is much sharper.
Excellent For Towing or Motorhomes
A lot of our customers remap their vehicles as they may tow heavy pieces of equipment such as caravans. A combination remap is best for towing as the extra torque really helps.
ECU Remapping reduces CO2 emissions due to less fuel being used against power output. Most of our customers report back considerable fuel savings.
Outperforms Tuning Boxes
ECU Remapping will always outperform a plug and play tuning box. They are very common on diesel vehicles as they plug directly into the vehicles common fuel rail and other sensors. This just fools the ECU and encourages more fuel being injected, it does not take into account the following.
Turbo Boost Limiters
Throttle position and so on.
Fault Code Permanent Deletes
There is a host of MIL or fault P-codes that we can permanently delete such as DPF Fault codes, EGR fault codes and so on. Our company policy is that we will not permanently delete safety equipment fault codes such as ABS, Airbag
Speed limiter Removals
Through ECU Remapping we can apply or remove speed limiters that are set inside the vehicle ECU software. This mainly applies to commercial vehicles such as vans, but there are speed limiters applied to cars as well. Example: BMW 150mph speed limiter.
Stage 1-2-3 Remaps
Stage 2-3 remaps are designed for vehicles that have been modified by hardware. For example, if you have fitted either an induction kit, Sports Exhaust, Larger Intercooler and larger injectors. We can map in different engine hardware mods so that their full potential can be achieved.
We stand by our products we offer a no quibble 14-day money back guarantee along with a lifetime guarantee on newly installed software.
BMW 335D TWIN TURBO STAGE-3
I called Remap2Race for a remap review. The car was remapped before and I wondered if there was any more power to be had.
After the tech reviewed the existing map and reported that there was lots more power available! Well, all I can say is that it now pulls like 2 trains!! Fantastic
VW GOLF 1.4 TSI GT STAGE-3
Mercedes S350L Diesel STAGE-2
I called Remap2Race to see if I could increase the power and torque, as I have just bought a large caravan.
The guy turned up on time explained the process to me. He then removed the ECU and tuned it. I can’t believe the difference! excellent work! the whole thing took around 2 hours to complete!
Get in Touch
9am – 8pm Everyday
Mobile Service Southwest
We Operate Between Bristol To Plymouth
What we Do
Speed limiter Removals
Fault Code Deletes & Much More!